One of the SoftSwim accessory items, SoftSwim Filter Aid and Flocculent improves filtration by trapping small particles that normally pass through the filter. SoftSwim Filter Aid and Flocculent is one of the quickest water clarifiers available by settling clouding particles to the bottom of the pool to be later vacuumed.
Features:
- 100% aluminum sulfate
- Restores water sparkle
- Dual purpose product to aid in filtration or to be used as a settling agent
Dosage:
- Sand and Cartridge Filters:
- Pre-dissolve 0.5-1.0 lb in bucket for pools between 10,000 and 35,000 gallons and pour slowly into skimmer with pump running
- Run filter continuously until water clears
- If pool does not clear, clean the filter and repeat as necessary
- Backwash after 48 hours or if the filter rises above 10 psi above clean filter pressure
- D.E. Filters:
- Backwash and clean filter according to manufacturer’s instructions
- For pools between 10,000 and 35,000 gallons, pre-dissolve 1-2 oz of product into clean bucket of pool water
- Slowly pour solution into skimmer with pump running
- Filter continuously for 24-48 hours
- Backwash after 48 hours or when filter pressure rises above 10 psi over clean filter pressure
- Use As Flocculent:
- Chemically clean filter according to manufacturer’s instructions
- Make sure water is properly balanced
- Add 1 lb per 6,500 gallons of water to clean bucket
- Mix with 1 gallon of water per each pound of product
- Broadcast solution over entire pool
- Allow 24-48 hours for product to settle at bottom of pool
- Vacuum settled debris to waste
Application:
- All In-Ground Pools
- All Above-Ground Pools
